PUBBLICAZIONI

Elenco delle Pubblicazioni

A. Pubblicazioni su Riviste internazionali

1) I.Smurov, A.Uglov, Yu.Krivongov, S.Sturlese, C.Bartuli, "Pulsed Laser Treatment of Plasma Sprayed Thermal Barrier Coatings: Effect of Pulse Duration and Energy Input", Journal of Materials Science, 27 (16) 1992, p. 4523-4530, doi:10.1007/BF00541589.

2) T.Valente, C.Bartuli "A Plasma Spraying Process for the Manufacture of Long Fibers reinforced Ti-6Al-4V Composite Monotapes", Journal of Thermal Spray Technology, 3 (1) 1994, p. 63-68, doi:10.1007/BF02649001.

3) C.Bartuli, F.Carassiti, T.Valente, "Interfacial Reactions in Al/SiC Composites Produced by Low Pressure Plasma Spray", Advanced Performance Materials, 1 (3) 1994, p. 231-242, doi:10.1007/BF00711205.

4) C.Bartuli, L.Bertamini, S.Matera, S.Sturlese "Investigation on the Formation of an Amorphous Film at the ZrO2/Y2O3 Interface of Thermal Barrier Coatings Produced by Plasma Spray", Materials Science & Engineering, A199, 1995, p.229-237, doi: 10.1016/0921-5093(94)09697-X.

5) C.Bartuli, R.W.Smith, "Comparison between Ni-Cr 40% vol. TiC Wear Resistant Plasma Sprayed Coatings Produced by SHS and Plasma Densified Powders", Journal of Thermal Spray Technology, 1996, 5, n.3, pp. 335-342, doi:10.1007/BF02645885.

6) C.Bartuli, "Self Propagating High Temperature Synthesis (SHS) for the Production of Ceramics: Current Technology and Applications", Ceramica Acta, 8, n.2, 1996, p. 59-70.

7) C.Bartuli, R.W.Smith, E.Shtessel "SHS Powders for Thermal Spray Applications", Ceramics International, 1997, 23, p. 61-68, doi:10.1016/0272-8842(95)00141-7.

8) C.Bartuli, C.Botrè, F.Botrè, G.Pecci "Atmospheric Pollution Originating from the Interaction of Different Gaseous Effluents", Journal of Environmental Pathology, Toxicology and Oncology, 1997, 16 (2-3), p. 245-252 http://www.ncbi.nlm.nih.gov/pubmed/9276010 .

9) C.Bartuli, R.Cigna, O.Fumei, "Prediction of durability for outdoor exposed bronzes: estimation of the corrosivity of the atmospheric environment of the Capitol Hill in Rome", Studies in Conservation 1999, 44, p. 245-252, http://www.jstor.org/pss/1506654 .

10) C.Bartuli, S.Angelucci, S.Lanuti, "Monitoring the state of conservation of protected copper alloy sculptures by means of polarisation resistance measurements", Materials Engineering, 2000, vol. 11, n.2, p.193-211.

11) M.H.Staia, T.Valente, C.Bartuli, D.B.Lewis, C.P.Constable: "Part I: Characterization of Cr₃C₂-25% NiCr Reactive Plasma Sprayed Coatings Produced at Different Pressures, Surface and Coatings Technology 2001, 146-147, p. 553-562 doi:10.1016/S0257-8972(01)01437-2

12) M.H.Staia, T.Valente, C.Bartuli, D.B.Lewis, A.Roman, H.Lésage, D.Chicot, G.Mesmacque: "Part II: Tribological performance of Cr₃C₂-25% NiCr Reactive Plasma Sprayed Coatings at Different Pressures" Surface and Coatings Technology 2001, 146-147, p. 563-570 doi:10.1016/S0257-8972(01)01438-4.

13) S.M.Barinov, D.Ferro, C.Bartuli, L.D'Alessio "Hardness of Hafnium Carbide Films Deposited on Silicon by Pulsed Laser Ablation", Journal of Materials Science Letters 2001, 20, p.1485-1487, doi:10.1023/A:1017970212233

14) C.Bartuli, T.Valente, M.Tului "Plasma Spray Deposition and High Temperature Characterization of ZrB₂-SiC Protective Coatings", Surface and Coatings Technology, 2002, 155 (2-3), p. 260-273, DOI: 10.1016/S0257-8972(02)00058-0.

15) C.Bartuli, F.Cipri, T.Valente, N.Verdone "CFD Simulation of an HVOF Process for the Optimization of WC-Co Protective Coatings", Computational and Experimental Methods, 2003, 7 (Surface Treatment VI), 71-83 doi: 10.2495/SURF030081.

16) T. Valente, S. Picchiotti, C. Bartuli, C.Testani "Titanium matrix reinforced composites produced by hot pressing of plasma sprayed preforms" Proc. Instn. Mech. Engrs, vol. 217 Part L: Journal of Materials: Design and Applications, 2003, 257-268, ISSN 1464-4207 (Print) 2041-3076 (Online) http://journals.pepublishing.com/content/f34652u2j132745r/ .

17) C.Bartuli, T.Valente, N.Verdone "Thermal Spray of Ceramic-Based materials", International Ceramics Journal, pp. 33-38. Feb. 2003 (ISSN 1123-8216).

18) C.Bartuli, T.Valente, E.Bemporad, F.Carassiti "Rapid solidification of plasma sprayed advanced materials: nanostructure characterisation" Int. J. of Materials and Product Technology, 20 (5/6), 2004, 377-391 DOI: 10.1504/IJMPT.2004.004776

19) T. Valente, C. Bartuli, M. Sebastiani, F. Casadei "Finite Element Analysis of Residual Stress in Plasma Sprayed Ceramic Coatings", Proc. Instn. Engrs. Vol. 218 (4), Part L: Journal of Materials: Design & Applications, 2004, 321-330, doi:10.1002/9780470320280.ch41.

20) G. Bolelli, V. Cannillo, L. Lusvarghi, T. Manfredini, C. Siligardia, C. Bartuli, A. Loreto, T. Valente, "Plasma-sprayed glass-ceramic coatings on ceramic tiles: microstructure, chemical resistance and mechanical properties", Journal of European Ceramic Society, 2005, 25, 1835-1853, doi:10.1016/j.jeurceramsoc.2004.06.018.

21) C.Bartuli, T.Valente, E.Bemporad, M.Tului "Parametric Study of an HVOF Process for the Deposition of Nanostructured WC-Co Coatings", Journal of Thermal Spray Technology, 2005, 14 (2), 187-195(9) (pubblicazione ad invito), doi:10.1361/10599630523746.

22) T.Valente, C.Bartuli, M.Sebastiani, A.Loreto "Implementation and Development of the Incremental Hole Drilling Method for the study of Residual Stress in Thermal Spray Coatings", Journal of Thermal Spray Technology, 2005, 14(4) 1-9, doi:10.1361/105996305X76432..

23) T. Valente, C. Bartuli, G. Pulci, “Ceramic composites and thermal protection systems for reusable re-entry vehicles”, Advances in Science and Technology Vol. 45, 2006, pp. 1505-1514, doi:10.4028/www.scientific.net/AST.45.1505.

24) C. Bartuli, L. Lusvarghi , T. Manfredini, T. Valente "Thermal spraying to coat traditional ceramic substrates: case studies" Journal of European Ceramic Society, 27 (2007), 1615-1622, doi:10.1016/j.jeurceramsoc.2006.05.049.

25) C. Bartuli,T. Valente, F. Casadei, M.Tului, “Advanced thermal spray coatings for tribological applications” Proc. IMechE Vol. 221 Part L: J. Materials: Design and Applications, 2007, 175-185, doi: 10.1243/14644207JMDA135. (articolo premiato con Premio “Donald Julius Groen Prize 2007”, Institution of Mechanical Engineers, Structural Technology and Materials Group).

26) F. Cipri, C. Bartuli, T. Valente, F.Casadei,. “Electromagnetic and Mechanical Properties of Silica - Aluminosilicates Plasma Sprayed Composite Coatings”, Journal of Thermal Spray Technology, 2007, vol. 16 (5-6), p 831-838 (pubblicazione ad invito), doi:10.1007/s11666-007-9074-z.

27) C. Bartuli, F. Cipri, T. Valente, “Thermal spraying and the fabrication of coatings with tailored electro-magnetic properties”, Inorganica Chimica Acta, 2008, 361 p. 4077–4088, doi:10.1016/j.ica.2008.03.063.

28) F. Cipri, F. Marra, G. Pulci, J. Tirillò, C. Bartuli, T. Valente, “Plasma sprayed composite coatings obtained by liquid injection of secondary phases” Surface & Coatings Technology, 2009, 203 (15) 2009, 2116-2124 doi:10.1016/j.surfcoat.2008.09.029

29) C. Bartuli, F. Marra, G.Pulci, T. Valente, “Wear resistant alumina-titania plasma sprayed coatings from nano-structured precursors”, in Surface Modification Technologies XXII, T.S. Sudarshan, M. Jeandin Eds, special issue of Surface Engineering, 2009, in corso di stampa (corrected proof). Pubblicato in “Surface Modification Technologies XXII, T.S. Sudarshan & P. Nylen Eds, Valar Docs, USA, 2009, p. 255-263, ISBN: 978-0-9817065-1-1 (http://www.amazon.com/gp/product/images/B002AD9CUY/ref=dp_image_0?ie=UTF8&n=283155&s=books ).

30) J.M. Tulliani, C. Bartuli, E. Bemporad, V. Naglieri, M. Sebastiani, “Preparation and mechanical characterisation of dense and porous zirconia produced by gel casting with gelatine as a gelling agent”, Ceramics International, 35, 2009, 2481–2491 http://dx.doi.org/10.1016/j.ceramint.2009.02.017

31) C.Bartuli “Liquid Feedstock Thermal Spray”, Invited Editorial, “Technology Vision”, Surface Engineering, 2009, 25 (5) 343-345, doi:10.1179/174329409X433948.

32) C. Bartuli, J.M. Tulliani, E. Bemporad, J. Tirillò, G. Pulci, M. Sebastiani, “Mechanical properties of cellular ceramics obtained by gel casting: characterization and modeling”, Journal European Ceramic Society, 2009, 29 2979–2989 doi:10.1016/j.jeurceramsoc.2009.04.035 (tra i “Top 25 Hottest Articles”, 25 articoli più scaricati dal sito della rivista nel periodo luglio-settembre 2009).

33) P.Marcassoli, M.Cabrini, J.Tirillò, C.Bartuli, P.Palmero, L.Montanaro, “Mechanical characterization of hydroxiapatite micro/macro-porous ceramics obtained by means of innovative gel-casting process”, Key Engineering Materials, 2010, vol. 417–418 (Advances in Fracture and Damage Mechanics VIII), 565-568 doi:10.4028/www.scientific.net/KEM.417-418.565.

34) G. Pulci, J. Tirillò, F. Marra, F.Fossati, C.Bartuli, T. Valente, “Carbon-phenolic ablative materials for re-entry space vehicles:manufacturing and properties” Composites Part A: Applied Science and Manufacturing, 41, 2010, 1483-1490,, doi: 10.1016/j.compositesa.2010.06.010

35) P. Palmero, M. Lombardi, L. Montanaro, J. Tirillo, C. Bartuli, T. Valente, P. Marcassoli, M. Cabrini, “Development and mechanical characterization of hydroxyapatite micro/macro-porous scaffolds by an innovative gel-casting process, Materiały Ceramiczne/Ceramic Materials (ISSN 1644-3470, Polskie Towarzystwo Ceramiczne, 30-059 Kraków, al. Mickiewicza 30) 2010, 62 (3), 355—362. http://www.ptcer.pl/mccm/en/article-details/62/3/278

36) J.M. Tulliani, C. Bartuli, E. Bemporad, A. Cavalieri, J. Tirillò, G. Pulci, M. Sebastiani, Dense and Porous Zirconia Prepared by Gelatine and Agar Gel-Casting: Microstructural and Mechanical Characterization, MATERIAłY CERAMICZNE (ISSN 1644-3470 Polskie Towarzystwo Ceramiczne, 30-059 Kraków, al. Mickiewicza 30) 2010, 63 (1), 109-116.

37) F. Marra, G. Pulci, J. Tirillò, C. Bartuli, T. Valente, “Numerical simulation of oxy-acetylene testing procedure of ablative materials for re-entry space vehicles”, Proceedings of the Institution of Mechanical Engineers, Part L, Journal of Materials: Design and Applications, 225(1), 2011, 32-40, doi:10.1177/14644207JMDA335

38) C. Bartuli, R. Cigna, O. Fumei, T. Valente, “A critical examination of the European Standard EN 1504, - Products and Systems for Protection and Repair of Concrete Structures”, Journal of Civil Engineering and Architecture, 6 (2), 2012, 226-232.

39) J-M. Tulliani, E. Bemporad, M. Sebastiani, G. Pulci, J. Tirillò, C. Bartuli, "Dense and Cellular Zirconia Produced by Gel Casting with Agar: Preparation and High Temperature Characterization" Journal of Nanomaterials, vol. 2013, Article ID 108076, 11 pages, 2013. doi:10.1155/2013/108076

40) G. Pulci, J. Tirillò, F. Marra, F. Sarasini, A. Bellucci, T. Valente, C. Bartuli, “High Temperature Oxidation and Microstructural Evolution of Modified MCrAlY Coatings”, Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 45A (3), 2014, 1401-1408, doi:10.1007/s11661-013-2086-z

41) G. Pulci, J. Tirillò, F. Marra, F. Sarasini, A. Bellucci, T. Valente, C. Bartuli, “High temperature oxidation of MCrAlY coatings modified by Al₂O₃ PVD overlay”, Surface & Coatings Technology, Special Issue 6^th RIPT, Limoges 2013, 2015, 268, 198–204 http://dx.doi.org/10.1016/j.surfcoat.2014.09.048

42) C. Polese, S.B. Dabagov, A. Esposito, A. Liedl, D. Hampai, C. Bartùli, M. Ferretti, “Proposal for a Prototype of Portable µXRF Spectrometer”, Proc. of Channeling 2014, Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 2015, 355 281–284 doi:10.1016/j.nimb.2015.02.043

43) L Baiamonte, F Marra, G Pulci, J Tirillò, F Sarasini , C. Bartuli, T. Valente “High temperature mechanical characterization of plasma-sprayed zirconia-yttria from conventional and nanostructured powders”, Surface and Coatings Technology, 2015, 277, 289–298 doi:10.1016/j.surfcoat.2015.07.071

44) L.Paglia, J. Tirillò, F.Marra, C.Bartuli, A. Simone, T. Valente, G.Pulci, "Carbon-phenolic ablative materials for re-entry space vehicles: Plasma wind tunnel test and finite element modeling", Materials & Design, 2015, 90, 1170-1180 doi:10.1016/j.matdes.2015.11.066.

45) L. Baiamonte, F. Marra, S. Gazzola, P. Giovanetto, C. Bartuli, T. Valente, G. Pulci, “Thermal Sprayed Coatings for Hot Corrosion Protection of Exhaust Valves in Naval Diesel Engines”, Surface and Coatings Technology, 2016, 295, 78-87 doi:10.1016/j.surfcoat.2015.10.072

46) Marra, F., Baiamonte, L., Bartuli, C., Valente, M., Valente, T., Pulci, G. “Tribological behaviour of alumina-titania nanostructured coatings produced by air plasma spray technique, 2016, Chemical Engineering Transactions, 47, pp. 127-132 Scopus ID 2-s2.0-84963719158; DOI: 10.3303/CET1647022

47) Pulci, G; Marra, F; Baiamonte, L; Bartuli, C; Valente, T., 2016. Hot corrosion resistance of ceramic-metallic thermal sprayed coatings. Journal of Applied Biomaterials & Functional Materials 14(1) 2016, 102-103 ISSN:2280-8000 DOI: 10.5301/jabfm.5000272

48) Marra, F; Genova, V; Fedrizzi, L; Lanzutti, A; Bartuli, C; Pulci, G; Valente, T. Effect of zirconium concentration for modified diffusion aluminide coating in hot corrosion and oxidation tests, Journal Of Applied Biomaterials & Functional Materials ISSN:2280-8000 vol. 14(3) pp.356-356, 2016, DOI: 10.5301/jabfm.5000321.

49) Pulci, G., Valente, T., Bartuli, C., Marra, F., “Nanostructured YSZ thermal barrier coatings obtained by atmospheric plasma spray”, Advanced Science Letters, 2017, 23 (6), 5998-6001 DOI: 10.1166/asl.2017.9091

50) Pulci, G., Paglia, L., Genova, V., Bartuli, C., Valente, T., Marra, F., “Low density ablative materials modified by nanoparticles addition: Manufacturing and characterization”, Composites Part A: Applied Science and Manufacturing, 2018, 109, 330–337, https://doi.org/10.1016/j.compositesa.2018.03.025

51) Pacelli, S., Paolicelli, P., Avitabile, M., Varani, G., Di Muzio, L., Cesa, S., Tirillo', J., Bartuli, C., Nardoni, M., Petralito, S., Adrover, A., Casadei, M.A., “Design of a tunable nanocomposite double network hydrogel based on gellan gum for drug delivery applications”, European Polymer Journal, 104, 2018, 184-193, https://doi.org/10.1016/j.eurpolymj.2018.04.034

52) Paolicelli, P., Petralito, S., Varani, G., Nardoni, M., Pacelli, S., Di Muzio, L., Tirillò, J., Bartuli, C., Cesa, S., Casadei, M.A., Adrover, A. "Effect of glycerol on the physical and mechanical properties of thin gellan gum films for oral drug delivery", International Journal of Pharmaceutics, 547 (2018), 1-2, 226-234 https://doi.org/10.1016/j.ijpharm.2018.05.046

53) Genova, V., Paglia, L., Marra, F., Bartuli, C., Pulci, G., Pure thick nickel coating obtained by electroless plating: Surface characterization and wetting properties, Surface and Coatings Technology, 357, 2019, 595-603 https://doi.org/10.1016/j.surfcoat.2018.10.049

54) Baiamonte, L., Bartuli, C., Marra, F., Gisario, A., Pulci, G. Hot corrosion resistance of laser-sealed thermal- sprayed cermet coatings (2019) Coatings, 9 (6), art. no. 347. https://doi.org/10.3390/coatings9060347

55) Baiamonte, L., Tului, M., Bartuli, C., Marini, D., Marino, A., Menchetti, F., Pileggi, R., Pulci, G., Marra, F. Tribological and high-temperature mechanical characterization of cold sprayed and PTA-deposited Stellite coatings (2019) Surface and Coatings Technology, 371, pp. 322-332. https://doi.org/10.1016/j.surfcoat.2019.04.032

B. Pubblicazioni su Libri e Atti di Congresso Internazionali con Referee

1) M.Guglielmi, D.Festa, G.Mezinskis, C.Bartuli "Sol-Gel Preparation of Thick Glass and Glass-Ceramic Coatings", in “Proceedings of XVth International Symposium on Glass”, Nauka, Leningrado, Russia, 1990, vol. 4, p.74-79.

2) S.Sturlese, R.Dal Maschio, N.Zacchetti, C.Bartuli, M.Berardo, "Effect of Deposition Temperature on Thermal Fatigue Resistance of Plasma Sprayed Thermal Barrier Coatings", in "Materials Science Monographies", Vol. 67: "High Performance Ceramic Films and Coatings", P.Vincenzini Ed., Elsevier Science Publishers, B.V., Amsterdam, 1991, p. 353-363.

3) C.Bartuli, C.Botrè "An Irreversible Thermodynamic Approach for the study of Sewage Disposal Plants in Rome", in "Ecological Physical Chemistry, Proceedings of an International Workshop", C.Rossi, E.Tiezzi Eds., Elsevier Science Publishers B.V., Amsterdam, 1991, p. 573-583.

4) C.Bartuli, F.Carassiti, R.Turriziani, T.Valente, "Manufacture and Characterization of Continuous SiC Fibre Reinforced Aluminium Matrix Composites by Low Pressure Plasma Spraying", in "Composite Materials", A.Di Benedetto, L.Nicolais, R.Watanabe Eds., North Holland, Amsterdam, 1992, p. 259-271.

5) C.Bartuli, R.W.Smith, E.Shtessel "Self-Propagating High Temperature Synthesis (SHS) of Ceramic and Composite Powders for Thermal Spray Applications", in "Advances in Science and Technology" Vol. 5: "Advances in Inorganic Films and Coatings", P.Vincenzini Ed., Techna Srl, 1995, p. 131-140.

6) E.Bemporad, F.Carassiti, C.Bartuli "A Spray-Drying Process for the Production of YBCO and Ag-doped YBCO Superconductive Powders", in "Advances in Science and Technology, 8: Superconductivity and Superconducting Materials Technologies", P.Vincenzini Ed., Techna, 1995, p. 355-364.

7) M.Marabelli, C.Bartuli, B.Colombo "The conservation of the Marcus Aurelius’ monument: technical studies", Proc. of the International Conference “Metallrestaurierung, Metal Restoration", M.Mach Ed., Arbeitshefte Dass Bayerischen Landesamtes fur Denkmalpflege, Band 94, Monaco, 1998, p. 134-138.

8) C.Bartuli, S.Angelucci, S.Lanuti, "Polarization resistance measurements for the monitoring of the corrosion rate of protected copper alloy sculptures", Atti del Congresso "Art '99, 6th International Conference on Non-Destructive Testing and Microanalysis for the Diagnostics and Conservation of the Cultural and Environmental Heritage", M.Marabelli, C.Parisi Eds., Euroma, Roma, 1999, vol. II, p. 1345-1359

9) C.Bartuli, "Evaluation of the effect of hydrophobic treatments on corrosion resistance of steel in carbonated concrete in historical buildings and structures", in COST 521 Action: Corrosion of Steel in Reinforced Concrete Structures: Proceedings of the Workshop, 21-24 September 1999, Annecy, France”, A.Raharinaivo Ed., 1999, p. WP C 3, I7, 1-3.

10) C.Bartuli, T.Valente, G.Visconti, M.Tului, "Plasma sprayed ultra high temperature ceramics for thermal protection systems" in "Thermal Spray. Surface Engineering via Applied Research", C. Berndt Ed., ASM International, Materials Park, OH, 2000, p.837-841.

11) F.Botrè, C.Bartuli, E.Podestà, F.Mazzei, “Development of enzymatic inhibition bioelectrodes for the direct determination of phycotoxins”, Proceedings of CAAT 20th Anniversary Symposium "Celebrating twenty years of human science", Baltimore, 10-11 September 2001. p. 12

12) T.Valente, C.Bartuli, M.Tului, "Thermal Sprayed Hard Cr₃C₂-Ni Cr Coatings for Wear Protection", in "Thermal Spray 2001: New Surfaces for a New Millennium " ASM Internation, Materials Park, OH, USA, 2001, p.1075-1084 (ISBN 10: 0-87170-785-3, ISBN 13: 978-0-87170-785-7).

13) C.Bartuli, T.Valente, M.Tului, "High Temperature Behaviour of Plasma Sprayed ZrB₂-SiC Composite Coatings", in "Thermal Spray 2001: New Surfaces for a New Millennium " ASM Internation, Materials Park, OH, USA, 2001, p.259-262.

14) C.Bartuli, T.Valente, F.Casadei, L.Fedrizzi "Titanium Nitride/Titanium Composite Coatings Fabricated by Reactive Plasma Spraying on Titanium Alloy Substrates", in "Euromat 2001: Conference Proceedings", Pubblicato in formato elettronico (CD-rom) da Associazione Italiana di Metallurgia, Milano, 2001 (ISBN 88-85298-39-7), 489.doc.

15) E.Bemporad, C.Bartuli, F.Casadei, F.Carassiti, T.Valente, "Fabrication and Characterization of Cr₃C₂-NiCr Plasma Sprayed Coatings" ", in "Euromat 2001: Conference Proceedings", Pubblicato in formato elettronico (CD-rom) da Associazione Italiana di Metallurgia, Milano, 2001 (ISBN 88-85298-39-7), 743.doc.

16) E.Bemporad, T.Valente, C.Bartuli, F.Carassiti "Advanced Characterization of Nanostructured Thin and Thick Protective Coatings", Proceedings of the 5^th Symposium of European Vacuum Coaters", Anzio, 30 Sett.-2 Ott. 2002, pubblicazione su CD-ROM.

17) C.Bartuli, T.Valente, F.Cipri, E.Bemporad "Nanostructured Wear Resistant Coatings Deposited by HVOF", in "Surface Engineering: Coatings and Heat Treatments", Proceedings of the 1st International Surface Engineering Congress and the 13th IFHTSE Congress” O. Popoola, N. B. Dahotre, S. Midea, H. Kopech Eds; ISBN 0-87170-781-0, ASM International, Materials Park, OH, USA, 2003, p. 480-488, doi: 10.1361/cp2002ht480.

18) C.Bartuli, T.Valente, E.Bemporad, M.Tului "A Parametric Study of an HVOF Process for the Deposition of Nanostructured WC-Co Coatings", in "Thermal Spray 2003: Advancing the Science & Applying the Technology", C.Moreau, B.Marple Eds, ASM International, Materials Park, OH, USA, 2003, p. 283-289.

19) T. Valente, C. Bartuli, A. Loreto, E. Bemporad, T. Manfredini, L. Lusvarghi, "Plasma sprayed nanostructured glass-ceramic matrix composite coatings from the CaO-SiO₂-ZrO₂ eutectic system", in "Thermal Spray Solutions: Advances in Technology and Applications", Pubblicazione su CD-rom ISBN 3-87155-792-7, DVS Verlag, GmbH, Dusseldorf, Germany, 2004, pp. 105-110.

20) T. Valente, C. Bartuli, "Multiscale Features in Surface Engineering: Matching the appropriate Length Scale for Coating Simulation & Development" Proceeding of the "International Conference on Computational Engineering & Science - Symposium on Innovative Aircraft Design", Madeira, Portugal, 2004.

21) C.Bartuli, "The Degradation of Concrete and Reinforced Concrete: Origins, Restoration, Prevention of Further Damage" in "Proceedings of Art'05 - 8th International Conference on "Non Destructive Investigations and Micronalysis for the Diagnostics and Conservation of the Cultural and Environmental Heritage", Ed. C. Parisi, G. Buzzanca, A. Paradisi, Rome, 2005, Pubb. su CD Rom, ISBN 88-89758-01-5, document D-138.

22)C. Bartuli, R. Cigna, O. Fumei, G. Raoli, "Internal and external corrosion of lighting columns: a people’s safety problem", in "Proceedings of EuroCorr 2005", Pubblication on CD-ROM ISBN 972-95921-2-8, SPM, Lisbon, Portugal, 2005, paper 196

23)F. Cipri, C. Bartuli, T. Valente, F.Casadei,. “Electromagnetic and Mechanical Properties of Silica - Aluminosilicates Plasma Sprayed Composite Coatings”, in “Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference”, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007, p.507-512.

24)R. Cigna, C. Bartuli, “Modifications to grouts to improve performance”, in “Proc. of COST 534 Action (New Materials, systems, methods and concepts for durable prestressed concrete structures): Final Report”, 26 – 27 November 2007 Toulouse, France, Part V: New Service Life Approaches, 2007, p. 25-29.

25) R. Petriaggi, B. Davidde, C. Bartuli, E. Palmisano, G. Lino “In situ conservation by cathodic protection of cast iron findings in marine environment” in “Proc. of Art 2008: Non-destructive investigations and microanalysis for the diagnostics and conservation of cultural and environmental heritage”, Gerusalemme, 25-28 Maggio 2008, ISAS, Jerusalem, Israel, pubblicazione in CD ROM, paper 93.

26) R. Cigna, C. Bartuli, “Modifications to grouts to improve performance”, in “COST 534 New Materials, Systems, Methods and Concepts for Prestressed Concrete Structures” R.B. Polder, M.C. Alonso, D.J. Cleland, B. Elsener, E. Proverbio, Ø. Vennesland, A. Raharinaivo Eds, COST Office, TNO, Delft, The Nederlands (ISBN: 9789059863323)”, 2009.

27)J.M. Tulliani, V. Naglieri, C. Bartuli, G. Pulci, J. Tirillò, E. Bemporad, M. Sebastiani, “Dense and porous zirconia prepared by gelatin and agar gel casting: microstructural and mechanical characterization”, in “Proc. of the 11th International Conference and Exhibition of the European Ceramic Society-ECERS, Krakow, Poland, 21-25 June 2009”, M.M.Bucko, K.Haberko, Z.Pedzich, L.Zich Eds., ISBN:978-83-60958-54-4.; 2010, pub. in CD-ROM, paper K-O-13, pp. 448-455.

28) P. Palmero, M. Lombardi, L. Montanaro, J. Tirillò, C. Bartuli, T. Valente, P. Marcassoli, M. Cabrini, “Development and mechanical characterization of hydroxyapatite micro/macro-porous scaffolds by an innovative gel-casting process” in in “Proc. of the 11th International Conference and Exhibition of the European Ceramic Society-ECERS, Krakow, Poland, 21-25 June 2009”, M.M.Bucko, K.Haberko, Z.Pedzich, L.Zich Eds., ISBN:978-83-60958-54-4.; 2010, pub. in CD-ROM, paper D-P-02, pp. 1019-1026.

29) C. Bartuli, R. Cigna, O. Fumei, T. Valente, “A critical examination of the European Standard EN 1504, - Products and Systems for Protection and Repair of Concrete Structures”, Proceedings of the Second International Conference on Sustainable Construction Materials and Technologies, June 28-30 2010, Ancona, Italy, J. Zachar, P.A. Claisse, T.R. Naik, E.Ganjian Eds, UWM Center for By-Products Utilization, Milwaukee, WI, USA, ISBN 978-1-4507-1490-7, vol 1 pp. 341-348 (freely avaialble http://www.claisse.info/2010%20papers/l35.pdf).

C. Pubblicazioni su Riviste Nazionali

1) C.Bartuli, S.Sturlese "Effect of Substrate Cooling on Properties of Ceramic Coatings", International Institute of Welding Document SC-S-30/88, published in Rivista Italiana di Saldatura, 6, 1991, p. 539-548.

2) C.Bartuli, F.Botrè, E.Spirito, M.Valente "Il Ruolo dell'Amianto nell'Industria Moderna: Motivi e Scelte per la sua Sostituzione", Rassegna Chimica, 2-3 1995, p.59-73.

3) C.Bartuli, C.Botrè, A.Campana, E.Fabrizi "Valutazioni Comparate di Tipo Chimico-Fisico su Gruppi Analoghi di Denari Repubblicani Coniati nel I Secolo a.C.: Papia e Roscia", Panorama Numismatico, n.97, 1996, p.15-19.

4) C.Bartuli, R.Cigna, B.Colombo, M.Marabelli, "Valutazione dei fenomeni corrosivi in corso sulla superficie della statua equestre dell'Imperatore Marco Aurelio", Materiali e Strutture, Anno VI, n.3, 1996, p. 127-136

5) C.Bartuli, C.Botrè, E.Fabrizi, "Analisi mediante fluorescenza con raggi x di monete argentee romane di periodo repubblicano: un'interpretazione storica" Rivista Italiana di Numismatica, vol. XCVIII, 1997, p. 85-107.

6) C.Bartuli, T.Valente, N.Verdone "Rivestimenti Ceramici Ottenuti con Tecniche di Termospruzzatura", Ceramica Informazione, 417 (7-8) 2002, p. 597-603.

7) C. Testani, C. Bartuli, M.Sarasini, T. Valente, “Tension-tension fatigue behavior of a unidirectional titanium-matrix composite (SCS-6/SP-700) at elevated temperature" ("Comportamento meccanico in prove di fatica a caldo di compositi metallici a matrice di lega SP-700 rinforzata con fibre di Carburo di silicio tipo SCS-6"), La Metallurgia Italiana, 7-8 2005, 31-36.

D. Pubblicazioni su Libri Nazionali

1) C.Bartuli "Cap.6 Materiali - Metalli: Proprietà e Degrado", in "Il Manuale del Restauro Architettonico", Dir. Scient. Luca Zevi, Mancosu Editore, Roma, 2001, pp. 74-82 (ISBN: 888701700X, ISBN-13: 9788887017007).

2) C.Bartuli “Project for the cathodic protection of the interred portion of the support structure – Progetto di protezione catodica della porzione interrata dellaq struttura di sostegno”, in “Il Cavallo Morente di Francesco Messina nella Sede Centrale RAI: Studio, Restauro, Manutenzione (with english text)” (a cura di G. Basile), Saoara (PD), Febbraio 2013, ISBN-13: 978-88-6336-199-5, pp 113-122.

3) C.Bartuli “La corrosione di reperti in lega di ferro in acqua di mare e la conservazione in situ mediante protezione catodica”, in “Il sito archeologico subacqueo di Cala Spalmatore a Marettimo”, Soprintendenza del Mare – Regione Sicilia, in corso di stampa.

E. Pubblicazioni su Atti di Congresso Nazionali

1) C.Bartuli, F.Carassiti, D.Rossi, T.Valente "Processo di Produzione di Nastri Compositi a Matrice di Alluminio con Fibre Continue di Carburo di Silicio Mediante Spruzzatura al Plasma", in "Omaggio Scientifico a Renato Turriziani", 1992, vol. II, p. 245-256.

2) C.Bartuli, E.Bemporad, F.Carassiti, "Produzione di Film di Diamante e simili al Diamante attraverso Processi di Deposizione a Bassa Pressione", in "Omaggio Scientifico a Renato Turriziani", 1992, vol.II, p. 521-532.

3) C.Bartuli, E.Bemporad, F.Carassiti, T.Valente, "Reazioni Interfacciali in Compositi Al/SiC ottenuti mediante Plasma Sray a Bassa Pressione", in "I compositi a matrice metallica: fabbricazione proprietà e applicazioni", AIM, Milano, 1992, p.153-167.

4) C.Bartuli, B.Colombo, M.Marabelli, "Il Monumento Equestre di Marco Aurelio: Studio dello Stato di Conservazione e dei Metodi di Protezione Superficiale in Vista di una Possibile Esposizione", Atti del 3° Congresso Nazionale AIMAT, De Frede Editore, Napoli, 1996, p.1003-1011.

5)C.Bartuli, P.Dittami, E.Proverbio, "Deposizione di film di diamante mediante spruzzatura al plasma", Atti del Convegno FAST "Materiali, Ricerca e Prospettive Tecnologiche alle Soglie del 2000", Milano 10-14 Novembre 1997, FAST, Milano, vol.II, p. 1235-1244.

6)T.Valente, C.Bartuli, "Spruzzatura termica di riporti antiusura a base di Cr₃C₂", in "AIMAT 2000: Atti del 5° Congresso Nazionale AIMAT" a cura di José M. Kenny, AIMAT, 2000, vol. 1, p. 197-200.

7) T.Valente, M.Tului, C.Bartuli "Deposizione al Plasma di Rivestimenti UHTC per Protezioni Termiche di Velivoli da Rientro", in "Materiali per lo Spazio: Sintesi, Metodologie, Tecnologie", a cura di A.Passerone e M.L.Muolo, Stampe Grafiche Del Cielo, Genova, 2001, p. 187-207.

8) C.Bartuli, E.Bemporad, F.Casadei, T.Valente, F.Carassiti "Rivestimenti WC-Co Nanostrutturati realizzati tramite Tecnologia HVOF", Atti del 6° Convegno Nazionale AIMAT, Modena, Ottobre 2002 (pubblicazione su CD-ROM).

9) C.Bartuli, T.Valente, F. Ruffini "Deposizione al Plasma in Pressione di Gas Inerte di Rivestimenti di ZrB₂", Atti del 6° Convegno Nazionale AIMAT, Modena, Ottobre 2002 (pubblicazione su CD-ROM).

10) A. Loreto, L. Lusvarghi, C. Bartuli, T. Manfredini, G. Tempesta, G. Bolelli, " Production and Characterization of Plasma-Sprayed Glass and Glass-Ceramic Coatings", Atti del VII Convegno AIMAT, Ancona, 2004, Pubblicazione su CD-rom, 2004.

11) S. Angelucci, C. Bartuli, "Le sculture moderne in lega di rame della Collezione Peggy Guggenheim: un piano conservativo assistito da metodi elettrochimici", in "Monumenti in bronzo all'aperto: esperienze conservative a confronto", P.Letardi, I.Trentin, G.Cutugno, Eds., Collana Arte e Restauro, Nardini Editore, Firenze, 2004. Versione su carta: p. 195-200, Versione su CD-ROM: p. 275-287.

12) T. Valente, C. Bartuli, S. Picchiotti and F.Marra, “Microstructural properties and high temperature peromance of plasma sprayed YSZ thermal barrier coatings from nanostructured powders”, Atti dell’8° Convegno Nazionale AIMAT, Palermo 2006, pubblicazione su CD Rom, Ediset S.r.L., Palermo 2006

13) C. Bartuli, T. Valente, F. Marra, “Wear resistant alumina-titania plasma sprayed coatings from nanostructured precursors” Atti dell’8° Convegno Nazionale AIMAT, Palermo 2006, pubblicazione su CD Rom, Ediset S.r.L., Palermo 2006

14) C. Bartuli, R. Cigna, O. Fumei, “Prevenzione della corrosione dei trefoli delle strutture in calcestruzzo armato post-teso mediante uso di inibitori di corrosione nella malta di riempimento delle guaine”, Atti delle Giornate Nazionali di Corrosione e Protezione, VII edizione, 2007, AIM, Messina 20-22 Giugno 2007.

15) F. Marra, G. Pulci, C. Bartuli, T. Valente, “Rivestimenti ceramici funzionalizzati tramite iniezione secondaria di polveri in sospensione liquida” Atti del 9° Convegno AIMAT, D.Acierno, D.Caputo, R.Cioffi, A.D’Amore Eds, B.Liguiri, ISBN 9788890094866, 2008, p.441-445.

16) F. Cipri, C. Bartuli, F. Casadei, T. Valente, “Proprietà elettromagnetiche di rivestimenti spessi” Atti del 9° Convegno AIMAT, D.Acierno, D.Caputo, R.Cioffi, A.D’Amore Eds, B.Liguiri, 2008,ISBN 9788890094866, p.213-216.

17) J. Tirillò, E. Di Gioia, G.Pulci, C. Bartùli, T.Valente “Modellizzazione DIB-FEA del comportamento meccanico di ceramici cellulari” Atti del 9° Convegno AIMAT, D.Acierno, D.Caputo, R.Cioffi, A.D’Amore Eds, B.Liguiri, 2008, ISBN 9788890094866, p.685-689.

18) G. Pulci, L. Paglia, F. Casadei, C. Bartuli, T. Valente, “Comportamento all’ossidazione ed evoluzione microstrutturale di rivestimenti MCrAlY ottenuti con tecniche di termo deposizione”. Atti del 9° Convegno AIMAT, D.Acierno, D.Caputo, R.Cioffi, A.D’Amore Eds, B.Liguiri, 2008, ISBN 9788890094866, p.581-585.

19)C. Bartuli, “Resistenza di polarizzazione: strumento di valutazione e collaudo per interventi conservativi su monumenti in bronzo” in “La Diagnostica per il Restauro del Patrimonio Culturale”, Cuzzolin srl, Napoli, ISBN 978-88-87998-99-3 Atti del Convegno DIACOMAST 2008, Caserta, Febbraio 2008, 2009, pp. 449-463.

20) J. Tirillò, G. Pulci, F. Marra, F.Fossati, C.Bartùli, T. Valente, “Materiali ablativi a base carbon-fenolica per veicoli da rientro” Atti del 10° Convegno AIMAT, 2010, Capo Vaticano (VV) 5/8 Settembre 2010, a cura di R.Aiello e F.Testa, Università della Calabria Centro Editoriale e Librario, ISBN 978-88-7458-114-6, pp. 613-616.

21) G. Pulci, F. Marra, J. Tirillò, C. Bartuli, T. Valente, “Rivestimenti multistrato termospruzzati metalloceramici per barriere termiche di nuova concezione” Atti del 10° Convegno AIMAT, 2010, Capo Vaticano (VV) 5/8 Settembre 2010, a cura di R.Aiello e F.Testa, Università della Calabria Centro Editoriale e Librario, ISBN 978-88-7458-114-6 ,pp. 513-516.

22)C. Bartuli, G. Pulci, T. Valente, A. Bellucci, F. Casadei “Rivestimenti MCrAlY contro l’ossidazione ad alta temperatura: nuove composizioni e strategie”in “Atti Giornate Nazionali sulla Corrosione e Protezione - IX edizione” (6-8 Luglio 2011, Monte Porzio Catone, Roma), AIM Milano, Pubblicazione su CD ROM, 2011, ISBN: 978-88-85298-83-5, articolo p039 (12 pagg).

23) F. Marra, M. Tului, R. Puleggi, G. Pulci, J. Tirillò, F. Sarasini, C.Bartuli, M. Valente, T. Valente, “Rivestimenti ceramici di nuova generazione per termodeposizione plasma”, in “Atti XI Convegno Nazionale AIMAT”, Gaeta 16-19 Settembre 2012, a cura di G. dell’Agli, G. Mascolo, M.C. Mascolo, M. Pansini, 2012, Tipografia Pontone Cassino FR, ISBN 978-88-97930-037, 339-342.

24) J. Tirillò, G. Pulci, F. Marra, F. Sarasini, C.Bartuli, T. Valente, “Caratterizzazione termochimica e modellizzazione agli elementi finiti di scudi termici ablativi”, in “Atti XI Convegno Nazionale AIMAT”, Gaeta 16-19 Settembre 2012, a cura di G. dell’Agli, G. Mascolo, M.C. Mascolo, M. Pansini, 2012, Tipografia Pontone Cassino FR, ISBN 978-88-97930-037, 511-514.

25) Genova, V.; Marra, F.; Pulci, G.; Baiamonte, L.; Lanzutti, A.; Fedrizzi, L.; Bartuli, C.; Valente, T. “Rivestimenti diffusivi a base di alluminio modificati con zirconio per la protezione da corrosione e ossidazione”, in Atti delle Giornate Nazionali sulla Corrosione e Protezione (XI ed.), Ferrara - ISBN:978-88-98990-04-7 2015, pp.1-4.